# Toggle Switch PCB

**URL:** <https://dao.arrowair.com/t/toggle-switch-pcb/52>\
**Category:** Engineering\
**Tags:** electrical\
**Created:** [September 23, 2024, 3:28pm UTC](https://dao.arrowair.com/t/toggle-switch-pcb/52 "2024-09-23T15:28:53Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Julius](https://yyz2.discourse-cdn.com/flex004/user_avatar/dao.arrowair.com/julius/32/28_2.png) [@Julius](https://dao.arrowair.com/u/Julius)\
**Post date:** [September 23, 2024, 3:28pm UTC](https://dao.arrowair.com/t/toggle-switch-pcb/52/1 "2024-09-23T15:28:53Z")

</div>

**Functions of the Toggle Switch PCB**

- Power ON the Arduino in the signal distribution box with a manual toggle switch (It’s like a general switch to start the system)
- Manually turn on the DCDC converters for 12V and 5V (6 switches)
- Manually turn on the HV batteries (6 switches)
- Digital transfer of the switch position over the CAN network

**Changes in V2 compared to V1**

- Added an Arduino with can bus interface to transmit the switch positions (before there was a lot of cabeling for the switches)
- One more switch to start the overall system
- Changed the type of connectors for better assembly

Schematic:

 ![Toggle_1](https://canada1.discourse-cdn.com/flex004/uploads/arrow1/original/1X/304eb05a08a14e55ff262fc51d797a6dd8ba0218.jpeg)

2D Layer:

 ![Toggle_2](https://canada1.discourse-cdn.com/flex004/uploads/arrow1/original/1X/3c6f795315d912725cbfb42adb2d541b65b4c69d.jpeg)

Link to the files:  
[https://drive.google.com/drive/folders/1hGWI4b–CpJjhV1aDl8p\_8qU6XN8Gdx-?usp=drive\_link](https://drive.google.com/drive/folders/1hGWI4b--CpJjhV1aDl8p_8qU6XN8Gdx-?usp=drive_link)
